The Daily Grind is the ARC Abrasives, Inc. blog that showcases any news, case studies, and upcoming events for the company and consumers.
Start by reading any of the posts below.
Abrasive Cost Savings in Heavy Equipment Manufacturing
This cost saving analysis is based on a manufacturer of heavy equipment, including tractors, combines, hay tools, sprayers, forage and tillage equipment.
Continue reading “Abrasive Cost Savings in Heavy Equipment”
ARC Abrasives Exploring New Grain Technologies
Our abrasives engineers have been working closely with an expeditionary unit exploring ancient mines and artifacts originating near the top of an undisclosed mountain range. While the project is being held close to the vest, sources within the team suggest that ARC is developing abrasives in a new grain.
Continue reading “ARC Abrasives Exploring New Grain Technologies”
Belts and Application: Abrasive Product Spotlight
Belts are used in multiple applications from fine finishing of stainless steel coil to heavy stock and weld removal. In general heavy weight Y-weight are used for stock removal whilst flexible J-weight is used for fine finishing and contour work. In fact J-weight materials are not available in coarse grits coarser than 60.
Continue reading “Belts and Application: Abrasive Product Spotlight”
Resin Fiber Discs on Mild and Stainless Steel
Resin Fiber Discs are a flat disc used for heavy grinding and weld removal. They are used for similar applications as Flap Discs. Resin Fiber Discs consist of a stiff fiberboard backing coated with a single layer of resin and abrasive. ARC’s Resin Fiber Discs have grinding aids in both the AO and ZA products. This grinding aid helps performance and keeps the disc cooler during grinding. The discs have an arbor hole to allow them to be attached to a back-up pad which they are always used with. We recently created a case study of our discs on mild steel and stainless steel against top competitors that give very powerful insight with the performances.
Continue reading “Resin Fiber Discs on Mild and Stainless Steel”
Flap Wheels: Abrasive Product Spotlight
Flap Wheels are available as mounted or un-mounted products. Mounted flap wheel are generally 3” or less in diameter and are used on portable tools. Unmounted flap wheels are 4” and larger in diameter and the larger wheels are used on stationary tools.
Flap Wheels are designed for light finishing, deburring and flash removal. The flap design allows the wheel to contour around the work piece and smooth the surface. As the flap wears away new abrasive grain is exposed and the wheel continues to cut.
Continue reading “Flap Wheels: Abrasive Product Spotlight”